Cruisair Marine Air Conditioner Parts, Displays & Accessories

The A-282 Control Board is part of a legacy DX & TW cabin control system sold from the late 1990s through the present, and was recently discontinued by the OEM. It was also sold into a specialty coach/RV application.  This control board is a redesigned, newly manufactured, footprint-compatible replacement that operates identically.   Replaces similar DX (Direct Expansion/Self Contained/Split Units) and TW (Chiller/Tempered Water System) SMX Net Online power/logic boards discontinued by Cruisair® Part Number: ASY-426 YELLOW DX VERSION IN STOCK

The FX-1 Control Board is Micro-Air's long-standing cabin control standard for both self-contained & split DX systems and for CW air handlers. It supports the FX-1, FX-Maxx, and EasyTouch Control Displays. Part Number: ASY-370

The Micro Air Easy Start 364 is the most advanced and effective soft starter for all A/C applications.  It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to provide further protection for your compressor. Fits Dometic, Marine Air, Cruisair, and most marine A/C Brands. Part Number: ASY-364 Important:  X36 model will only work with units up to 18,000 BTUs when connected to 230V

The Micro Air EasyStart 368 Soft Starter is the most advanced and effective soft starter for all A/C applications.  It employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current. Easy Start can deliver 65-75% start current reduction compared to a compressor's LRA (locked-rotor amperage). It also has numerous specialized fault checks not found in any other soft starter to protect your compressor further. - X48 and X72 MODEL DISCONTINUED, REPLACED BY   EasyStart ASY-398-X1S-BL Flex ASY-368-X48 for  30,000 to 48,000 BTU units  ASY-368-X72 for  48,000 to 72,000 BTU units

The 2-station Pump Relay Box allows control of a common seawater pump between multiple cabins or chiller controls. It can also be used to control a common chilled-water loop pump between multiple chiller controls. Fully-isolated pump trigger inputs accept either 115V/60Hz or 230V/50Hz. The pump power source and pump output is also isolated and can be either 115V or 230V. Triggers not needed, integrated into the board. Part Number: ASY-110-X01

The 6-station Pump Relay Box allows control of a common seawater pump between multiple cabin or chiller controls. It can also be used to control a common chilled-water loop pump between multiple chiller controls. Fully-isolated pump trigger inputs accept either 115V/60Hz or 230V/50Hz. The pump power source and pump output is also isolated and can be either 115V or 230V .  Triggers not needed, integrated into the board. Part Number: ASY-111-X01

The MA Replacement Trigger is a newly-manufactured, footprint-compatible, and functionally-compatible replacement trigger for use in the popular pump relay boxes for marine applications. The MA Replacement Trigger is dual-voltage and therefore you only need one part to work in both 115V and 230V applications. This trigger is used in the pump relay box. It is compatible with Dometic TR-115 and TR-230 Triggers.  5-7 DAYS PROCESSING TIME Part Number:  ASY-599-X01 / TR 115 - TR 230

Marine air conditioner motor start relay / Motor Starting Relay. Dealer Design Award Winner. Replacement for all standard potential relays - 50A.  Input:  110-270 VAC Single Phase.  Maximum Voltage Contact:  502 VAC (absolute).  Motor Power Rating:  Up to 10 HP. 90-day warranty on this air conditioner relay*. Part Number: 290339860

A-548, Replacement To-3 Triac.  This triac triggers the pumps when the A/C unit needs them on.  This Trac is located inside of the Pump relay Box.   90-day warranty*.   Peak Voltage: 6 00V, Amperage: 35A. Part Number: 758000006 / TG35F 40

Marine AC Compressor Triac Replacement Relay. When used with a high-current triac that controls the compressor switching, EasyStart requires that the triac be replaced with a power relay. This replacement relay is designed with mounting that matches the footprint of the Sanrex® TG35F40 triac, commonly used in marine air conditioners. Fully compatible with dometic and cruisair units. Part Number: ASY-503-X2D / 4120050

RBA Blower Assembly For Turbo Units (DTU, STX, STQ & VTD). Fits Dometic, Crusair and Marine Air, 6 - 16K BTUs. Capacitor Included with blower.  90-day warranty*. Select your model below.

Plastic return grilles design with rounded corners and paint-friendly materials, for use with marine A/C systems. Hidden fasteners and a unique snap-in function put these modern styled grilles in an unchallenged class of their own. They are available in different sizes. 90-day warranty*.